Libvirtd on Arm Processors
I haven’t posted to a blog in a long, long time. This is my first post for UglyPress I have two labs. I have a half rack of servers that I run a number of virts on baremetal. I use… Read More »Libvirtd on Arm Processors
Setup Static IP and DNS on the Banana-Pi BPi-P2-Pro from the UART
The BPi-P2 Pro is a chanllenging board. With no video output it makes it hard to setup. Plus with the board default to use DHCP, makes it hard to find. One of the best way to setup the board is… Read More »Setup Static IP and DNS on the Banana-Pi BPi-P2-Pro from the UART
Bridge Device Update
I have been having issues bridge devices, seems something has change. I can not use brctl or nmtui, I get a permission or a weird issue about vlan. If you are running into an issue where you can not setup… Read More »Bridge Device Update
New Network
Most people don’t do what I do on a Saturday night, but when you have no life, you got to fill up with something. I have a few router boards. I figured I would setup a new network in my… Read More »New Network
Banana-Pi BPi-P2 Pro Setup
Last Update: 15/02/24 The Banana-Pi BPi-P2 Pro is a new development board that uses a RockChip Arm Processor. These are designed to be IoT device, Intelligent Speech Recognition device (there is a microphone on the board), Robot Control or more.… Read More »Banana-Pi BPi-P2 Pro Setup
Trouble shooting SBC
Have you ever wanted something so bad, that you extensively search and when you find it, you don’t mind buying it used. That was the case with me, I wanted a Libre Computer Renegade Elite. It was at the time,… Read More »Trouble shooting SBC
How to setup ZimaBoard to run pfSense.
The ZimaBoard from IceWhale is a x86 hacker board that runs on an Intel Celeron N3350 Dual Core or an Intel Celeron N3450 Quad Core, depending on the model. This guide will show how to setup a ZimaBoard to run… Read More »How to setup ZimaBoard to run pfSense.
Setting up the Banana-R3 with OpenWRT
This is Part Two of the UglyScale Press – Assemble of the Banana BPI-R3 Here is the link on how to setup ZimaBoard 216 as a firewall with pfSense. We are setting up a private network for Small Board Computers.… Read More »Setting up the Banana-R3 with OpenWRT
How to flash Armbian to the eMMc of the Banana-Pi BPi-M5
The Banana-Pi BPi-M5 comes with 16 GB of embedded MultiMediaCard (eMMC) . eMMC is storage made up of NAND flash memory and a simple storage controller. Plus, it’s super fast. Armbian, is a free open source version of Linux that… Read More »How to flash Armbian to the eMMc of the Banana-Pi BPi-M5
Week in Tech 8/13/23
Welcome to the first “Week in Tech” Here are the stories that we are covering for the week Quake 2 Remaster Release Raspberry Pi used in crime Raspberry Pi Availability Apple and Samsung investing in Arm Debian to support RISC-V… Read More »Week in Tech 8/13/23
Libvirtd on the OrangePi
Update: 10/24/23 The Orange Pi 5 is an new board that been out since December of 2022. What make this board special is the face that is com 8-cores of the 64-Bit Arm process running on the RockChip RK3588 Arm… Read More »Libvirtd on the OrangePi